Link: http://www.duanesworld.net/duanesworld.net.geotherma.htm

I noticed back in early January that my Humidifer was not operating. Previous issues were that the humidifer was cycling very quickly on and off at times. I called my geothermal installer with the problem and was asked to do more troubleshooting. The humidifier finally quit and does not work now.

I called my Geothermal Installer. Not surprised that I needed to do some troubleshooting before anyone would be sent out to resolve the issue. I found that when installed, the 24 volt power was coming from the Bryant Air Handler not from a seperate transformer for the humidifier. I learned that the 24 volts was not present at the Air Handlers circuit board.

I relayed this information to my installer and due to other commitments, I was told to “sit tight", they’ll get back to me. Well, it is now near the end of February and no word from my installer. I have left numerous voice mails. I get the feeling that he doesn’t want to return my calls.

Needless to say that the humidifer is still not working. It is a really uncomfortable situation. Had I known the type of response I would get from my Geothermal Installer, I never would have had them install my HVAC system.

Link: http://www.duanesworld.net/duanesworld.net.sensors.htm

There is a new page for the ground temperature sensors. The page includes charts for the previous hour and meters which show the current temperature at depth. The page can be accessed directly at http://www.duanesworld.net/duanesworld.net.sensors.htm