| Heat Pump Troubles » |
Monitoring system repairs
Link: http://www.duanesworld.net/duanesworld.net.geothermal.WEL.live.htm
Well, since the replacement of the heat pump there have been a couple issues.
T6, the temperature sensor for the desuperheater hot water output was periodically not working. The T6 sensor has now been replaced.
The RunTime sensor for the Desuperheater has not been working. I checked the wiring today and the sensor is connected properly. The sensor is still not operating. Can’t tell if the Desuperheater pump is actually operating. Too much vibration from the compressor.
T2, the ground loop solution return is not still not operating. The wiring connections are proper. I will need to do some further troubleshooting and may need to replace this sensor.
Feedback awaiting moderation
This post has 5 feedbacks awaiting moderation...
Comment feed for this postLeave a comment
